Trek Maharashtra

Andharban Jungle Trek

Time
5 to 6 hours one way
Starts at
Pimpri village, Tamhini Ghat; ends at the Bhira dam backwaters
Good for
Forest walks; fit beginners with a guide
Ask
Map of Maharashtra with Andharban Jungle Trek marked in Pune district, Pune division Mumbai Pune Chh. Sambhajinagar Nagpur
Where it is Pune district, Pune division The pin marks the district, not the exact spot. Map outline: DataMeet India community, CC BY 4.0
Local name

अंधारबन . Also called or spelled Andharban, Andharban Forest, Dark Forest Trek.

How I made this guide

I put this guide together from sources I trust: the ASI, Maharashtra Tourism, state gazetteers, historians and recent trekker reports. I haven't checked it on the ground for this page yet. When I go, I'll add what it's really like on the day, and my own photos.

Status,

Entry is by forest department booking, online or at the start, with a limited number of visitors a day. A forest-appointed guide is compulsory, the trek must start by about 9 am and you must be out by about 4:30 pm, and night treks are not allowed. Check the current fee and rules when you book; the trail can close in heavy rain.

Heads up before you go

Entry is controlled by the forest department and a department-appointed guide is compulsory. The path is slippery with roots and wet rock, stream crossings can be strong in the monsoon, and the trail can close in heavy rain. Wear shoes with real grip, carry at least 3 litres of water, and be out of the forest by the closing time.

The quick version

Moderate difficulty
Time
5 to 6 hours one way
Height
Starts at about 658 m (2,160 ft) and descends
Starts at
Pimpri village, Tamhini Ghat; ends at the Bhira dam backwaters
Good for
Forest walks; fit beginners with a guide

Straight from my guide, last updated 21 November 2026. Timings and fees do change, so check locally before you set off.

Andharban is the walk I’d send a friend on when they want forest more than a summit. It’s a long descent through dense jungle, from the top of Tamhini Ghat down to the Bhira dam backwaters, with streams, waterfalls and valley views on the way. Book ahead, take the compulsory guide, and plan your ride home before you start.

What Andharban is

Andharban means “dark forest”, and in the first half of the trail the canopy is thick enough to earn the name. The route starts near Pimpri village at about 658 m, follows the edge of Pimpri dam, then runs through forest and grassland along the edge of the Kundalika valley before dropping to the Konkan side at Bhira. It doesn’t loop back, so you finish a long way by road from where you started.

The route

Section From Distance Time What it’s like
1 Pimpri start About 1.6 km About 1 hour Along a low wall beside Pimpri dam to the first stream
2 First stream About 5 km About 3 hours A second stream crossing, a short climb, then a long gentle descent through dense forest to the Hirdi plateau
3 Hirdi About 4.5 km About 2 hours A steep, slippery descent of about 2 km, then flat ground and a wide, shallow river crossing near Patnus

Hirdi village, about two-thirds of the way, has had a simple eatery and a place to refill water.

Permits and rules

  • Book with the forest department, online or at the start. Daily numbers are limited.
  • A forest-appointed guide is compulsory. You pay the guide at the gate.
  • Carry a printed ID that matches the name on your booking.
  • Start by about 9 am and be out by about 4:30 pm. No night treks.
  • The trail can close in heavy rain. Check before you leave home.

How to get there

  • From Pune: via Pirangut and Mulshi to Tamhini Ghat and Pimpri, about 70 km.
  • From Mumbai: via Lonavala, about 133 km.
  • Getting back: fix a cab or tempo traveller to drop you at Pimpri and collect you at Bhira or Patnus. Public transport there is thin.

My tips

  • Carry at least 3 litres of water per person. Treat stream water before drinking it.
  • Wear full sleeves and long trousers in the monsoon and just after; leeches are common.
  • Take a trekking pole. The descent is long and hard on the knees.
  • Follow the markers in fog, such as logs laid across side paths.
  • Leave for home before 4 pm so you’re over the ghat before dark.

Places near Andharban

You asked, I answered

How long is the Andharban trek?

About 11 to 13 km one way from Pimpri to the Bhira dam backwaters, depending on where you finish. It takes 5 to 6 hours.

Do I need permission for Andharban?

Yes. Entry is booked through the forest department, numbers are limited, and a guide appointed by the department is compulsory. Carry a printed ID that matches your booking.

Is Andharban difficult?

It's moderate: mostly downhill, but long, slippery and hard on the knees. Fit beginners manage it with good shoes and a trekking pole.

How do I get back from Bhira?

Arrange a vehicle in advance. The trek is one way and public transport from Bhira and Patnus is very limited.

Can I do Andharban at night or camp in the forest?

No night treks are allowed, and camping on the trail may not be permitted. Ask the forest department when you book.

Written by Vinay Kadam for Trek Maharashtra. Published 21 November 2026, updated .

Keep exploring Pune division

See all
Moderate difficulty

Pune division

Savlya Ghat

Ghat and valley About 1.5 hours one way
Easy difficulty

Pune division

Shaniwar Wada

Land fort 1.5 to 2 hours inside

Where are you coming from?

I will show road distances from this city wherever my guides have them. I only remember it on this phone.